Installation media: latest demo and testing live image (sha1)

  1. Remove all mobile flash drives from your host system.
  2. Plug the flash drive for deploying into the host system.
  3. Call the command "dmesg" and note the output about flash drive.
  4. Call "dd if=[image file] of=/dev/[flash drive] bs=1M".
    [flash drive] is the device block of flash drive not partition block.
  5. Plug the flash drive into the tablet you want to install Plasma Active.
  6. Boot from the flash drive and install step by step.
  7. Enjoy Plasma Active.

Reference: Plasma/Active/Install
arrow
arrow
    全站熱搜
    創作者介紹
    創作者 kylix 的頭像
    kylix

    kylix

    kylix 發表在 痞客邦 留言(0) 人氣()

    E-mail轉寄